Zentyal Forum, Linux Small Business Server

Zentyal Server => Directory and Authentication => Topic started by: killmasta93 on November 21, 2020, 06:12:20 am

Title: Samba issue with scan printer
Post by: killmasta93 on November 21, 2020, 06:12:20 am

Hi
I was wondering if someone else has had this issue before.  Currently running Aficio MP 4002 and on windows i can scan to a samba share it works unfortunately  smbv1, i tried enabling on the samba share doing the following on the nano /etc/samba/smb.conf

and adding this under global then restart

service samba-ad-dc restart


client min protocol = NT1
server min protocol = NT1


But not sure what else i missed?

Thank you

Title: Re: Samba issue with scan printer
Post by: doncamilo on November 25, 2020, 10:18:34 am

 :)

Did you check the firmware of the printer? It should exist an update to support non deprecated protocols. NT1 will weak the security of your domain.

Regarding your question, paste here the logs.

Cheers!

Title: Re: Samba issue with scan printer
Post by: killmasta93 on November 25, 2020, 06:43:41 pm

Thanks for the reply, well unfortunately it seems that printer does not have any firmware update

https://www.ricoh.com/products/mfp20170727_1

i guess im going to have to enable smbv1 but still haven't seem to be able to configure it

Thank you

Title: Re: Samba issue with scan printer
Post by: badapple7 on November 28, 2020, 12:18:44 am

I think the configuration should be ;

Code: [Select]

client max protocol = NT1
server max protocol = NT1
only if printer run on smbv1, but this is crazy!!!! dont work on smbv1

Title: Re: Samba issue with scan printer
Post by: killmasta93 on November 28, 2020, 01:37:02 am

yeah your right, what i did put another samba server

Title: Re: Samba issue with scan printer
Post by: badapple7 on November 28, 2020, 03:35:05 am

hi...only one server for printers service, for only one printer? fu***** printer XD

if your problem is resolved, good!!!

Title: Re: Samba issue with scan printer
Post by: killmasta93 on November 29, 2020, 01:02:18 am

yeah i know it sucks but yeah it got resolved