Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - yokobr

Pages: [1] 2
Installation and Upgrades / Moving out from Zentyal
« on: July 14, 2015, 10:00:01 pm »
Hi there,

I've been a Zentyal user since the very first versions. It's a real shame what's it's turning into.
If the goal of this project was "be an windows server replacement", it is now (poorly) and I really don't like it.
I was satisfied with postfix (no need for this openchange) and all the astonishing modules we had back there.
Even a basic use of a server like a proxy was removed. And that's not all the problem. For those who use it for enterprise or commercial ending: No trust at all. We can't trust on an "open sourced" "community" driven project which adds or remove modules every damn release. How can we put a function under production if we don't know if it will be available tomorrow anymore?
If you guys plan to create a commercial solution, please, get BSD kernel and do like the other guys, suck everything since the licence is much more permissive than gnu/linux, ubuntu ones..
I'm REALLY pissed off on moving 4 under production servers. You guys really took a shit on us, community.

Installation and Upgrades / Broken upgrade
« on: April 09, 2014, 08:16:06 pm »
Hi guys,

For some reson my upgrade from 3.2 to 3.3 stopped in the middle. Now i can't see the upgrade button anymore and i'm really afraid of rebooting my server. How can i fix it ?

Installation and Upgrades / Solution for multigateway problems
« on: November 06, 2013, 06:59:00 pm »
At least for me:

2- ADSL 20Mb

Internet connection on proxy clients stopped, the latency was too high (200ms) and speed was low (20Mb working at 4Mb). With chris4916 help i set the rules like this:


Other stuff - ADSL

And REMOVED "Any TCP" and "Any UDP" from rules. Then i got 9, 10 ms on latency (ping) and got speed back.

Installation and Upgrades / Slow internet connection
« on: October 21, 2013, 02:36:30 pm »
Hi everybody,

I'm experiencing such a low speed (i mean not the speed itself, but it takes almost 10 seconds to start loading an webpage) after upgrading to Zentyal 3.2.
I've tryied disabling everything: antivirus, filters, traffic shapping, but even without the proxy it's still so slow.

Hi everybody,

I'm experiencing such a low speed (i mean not the speed itself, but it takes almost 10 seconds to start loading an webpage) after upgrading to Zentyal 3.2.
I've tryied disabling everything: antivirus, filters, traffic shapping, but even without the proxy it's still so slow.

Hi guys,

I've created 2 mail virtual domains, but then, when zentyal asked me to save, i've cancelled. Now there are 2 empty-named virtual domains and i can't exclude them. I get the error on zentyal.log: 2013/05/21 16:08:09 DEBUG> EBox::Validate::checkDomainName - Invalid value for Virtual Domain: .

EDIT: It's on http://zentyal/Mail/View/VDomains

Installation and Upgrades / DNS Configuration
« on: July 23, 2012, 08:24:15 pm »
Hey guys,

When i type, it goes to /var/www. But when i type, it goes to /srv/www...
I wish that it was only /srv/www...

Sorry for my bad english.

Installation and Upgrades / Adsense
« on: October 24, 2011, 03:49:32 pm »
Hi guys,

I'm trying to enable adsense in Zentyal, but i got this:

Nome do host/alias   Tipo de registro   Valor/Destino                  Detectado em 24/10/11 11:39
www   CNAME (alias)
@   A (endereço)   
@   A (endereço)   
@   A (endereço)   
@   A (endereço)   
@   A (endereço)                                                           
Ou crie os seguintes registros NS (servidor de nomes) para o domínio usando seu registro de domínios:
Tipo de registro   Valor/Destino   Detectado em 24/10/11 11:39
NS (servidor de nomes)
NS (servidor de nomes)
NS (servidor de nomes)
NS (servidor de nomes)
NS (servidor de nomes)                    
NS (servidor de nomes)                    

Installation and Upgrades / Roudcube login
« on: September 23, 2011, 09:46:16 pm »
Hi guys

Please, i've tryed to install a roundcube skin, and then i get this message:

Please read the INSTALL instructions!

I've changed nothing but copying MobileCube skin into skin folder, on /etc/roundcube/skins

Installation and Upgrades / CGI Script
« on: August 29, 2011, 02:45:33 pm »
Hi everybody,

I'm trying to run a virtual web domain with a cgi script, but if i change /etc/apache2/sites-avaliable/ebox-domainame file, it auto-resets my config when i restart webserver module.. But without that config i get

Not Found

The requested URL /cgi-bin/wxis was not found on this server.

So, please, how can i make that file?

mine should look like this

<VirtualHost *:80>
   DocumentRoot /srv/www/
   <Directory /srv/www/>
      Options Indexes FollowSymLinks MultiViews
      AllowOverride None
      Order allow,deny
      allow from all

   ScriptAlias /cgi-bin/ /srv/www/
   <Directory "/srv/www/">
      AllowOverride None
      Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch
      Order allow,deny
      Allow from all

Installation and Upgrades / Can't send mail to Gmail
« on: August 22, 2011, 10:08:24 pm »
I know this is not a Zentyal issue, but i want to know if there's any good practice on zentyal to make it more "friendly" to gmail. I mean, i cannot send emails to gmail accounts because i'm flagged as a spammer... or something like that... But i'm out of every blacklist on earth, and i can send to any other mail domains in the hole world, but gmail.

Portuguese / Servidor de email
« on: August 01, 2011, 05:48:58 pm »
Olá galera,
Estou tentando configurar o zentyal como servidor de email, porém recebo esta mensagem no postmaster do terra:

Verificando o DNS reverso do IP []:

$ host domain name pointer

Resultado: OK, o IP [] resolve para um host válido [].

2) Verificando o DNS direto do host []:

$ host
Host not found: 3(NXDOMAIN)

Resultado: ERRO, o host [] não resolve para o IP [].

O DNS do IP [] não está corretamente configurado

Também nas regras de gateway, setei para que o serviço de email saia por uma wan (ip fixo) e o tráfego de internet por outra (banda larga), mas não está funcionando. às vezes os emails saem por um, às vezes por outro.

Installation and Upgrades / 2 WAN
« on: August 01, 2011, 04:41:09 pm »
How do i use 2 WAN

One just to send, recieve emails and host a webpage,

One just for http traffic (web surfing).

I set on "Network> Gateways > Gateway rules" and set http for one gateway, and dns, smtp, email and webhosting stuff on the other one. But sometimes, when i try to sent emails, it goes through the wrong isp :(

Installation and Upgrades / Users and Groups module problem
« on: July 28, 2011, 05:14:54 pm »
Hi guys, i'm getting this error

root command /etc/init.d/slapd start failed.
Error output:
Command output: Starting OpenLDAP: slapd - failed.
The operation failed but no output was produced. For hints on what went
wrong please refer to the system's logfiles (e.g. /var/log/syslog) or
try running the daemon in Debug mode like via "slapd -d 16383" (warning:
this will create copious output).
Below, you can find the command line options used by this script to
run slapd. Do not forget to specify those options if you
want to look to debugging output:
slapd -h 'ldap:/// ldapi:/// ldaps:///' -g openldap -u openldap -F /etc/ldap/slapd.d/
Exit value: 1 at /usr/share/perl5/ line 182
Error::throw('EBox::Exceptions::Sudo::Command', 'cmd', '/etc/init.d/slapd start', 'output', 'ARRAY(0x7fe2643f6668)', 'error', 'ARRAY(0x7fe2695e6438)', 'exitValue', 1, ...) called at /usr/share/perl5/EBox/ line 212
EBox::Sudo::_rootError('/usr/bin/sudo -p sudo: /var/lib/zentyal/tmp/ndx_NUVtAF.cmd 2>...', '/etc/init.d/slapd start', 256, 'ARRAY(0x7fe2643f6668)', 'ARRAY(0x7fe2695e6438)') called at /usr/share/perl5/EBox/ line 181
EBox::Sudo::_root(1, '/etc/init.d/slapd start') called at /usr/share/perl5/EBox/ line 136
EBox::Sudo::root('/etc/init.d/slapd start') called at /usr/share/perl5/EBox/ line 1103
EBox::Ldap::_tryToStartSlapd() called at /usr/share/perl5/EBox/ line 1119
EBox::Ldap::safeConnect('ldapi://%2fvar%2frun%2fslapd%2fldapi') called at /usr/share/perl5/EBox/ line 158
EBox::Ldap::anonymousLdapCon('EBox::Ldap=HASH(0x7fe266cb1810)') called at /usr/share/perl5/EBox/ line 222
EBox::Ldap::dn('EBox::Ldap=HASH(0x7fe266cb1810)') called at /usr/share/perl5/EBox/ line 534
EBox::UsersAndGroups::groupsDn('EBox::UsersAndGroups=HASH(0x7fe26746eb48)') called at /usr/share/perl5/EBox/ line 1972
EBox::UsersAndGroups::groups('EBox::UsersAndGroups=HASH(0x7fe26746eb48)') called at /usr/share/perl5/EBox/CGI/UsersAndGroups/ line 47
EBox::CGI::UsersAndGroups::Users::_process('EBox::CGI::UsersAndGroups::Users=HASH(0x7fe2695e97b0)') called at /usr/share/perl5/EBox/CGI/ line 264
EBox::CGI::Base::run('EBox::CGI::UsersAndGroups::Users=HASH(0x7fe2695e97b0)') called at /usr/share/perl5/EBox/CGI/ line 129
EBox::CGI::Run::run('EBox::CGI::Run', 'UsersAndGroups/Users', 'EBox') called at /usr/share/zentyal/cgi/ebox.cgi line 34
ModPerl::ROOT::ModPerl::Registry::usr_share_zentyal_cgi_ebox_2ecgi::handler('Apache2::RequestRec=SCALAR(0x7fe2696a9d08)') called at /usr/lib/perl5/ModPerl/ line 204
eval {...} called at /usr/lib/perl5/ModPerl/ line 204
ModPerl::RegistryCooker::run('ModPerl::Registry=HASH(0x7fe2643f9a58)') called at /usr/lib/perl5/ModPerl/ line 170
ModPerl::RegistryCooker::default_handler('ModPerl::Registry=HASH(0x7fe2643f9a58)') called at /usr/lib/perl5/ModPerl/ line 31
ModPerl::Registry::handler('ModPerl::Registry', 'Apache2::RequestRec=SCALAR(0x7fe2696a9d08)') called at -e line 0
eval {...} called at -e line 0

Hi guys,

I get an erro when i try to enable mail module or change user and groups settings... I think it may be a LDAP problem....
And my proxy is wide open... i would like to change it only to local network.. but squid.conf is reseted when i restart, enable or disabe any module... and so i canot do that http_proxy

Pages: [1] 2