Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: 1 [2]
16
Installation and Upgrades / Re: Rsync best practice to synchronize two zentyal server or a NAS with Zentyal
« on: April 11, 2014, 02:34:25 pm »
Hi,
In zentyal - http://doc.zentyal.org/en/backup.html
at the point "Data backup configuration in a Zentyal server"
in the image "general configuration" you can see there is user and password
in our installation one zentyal 3.3 and one 3.4 when you choose rsync there is not "password" field.
Thank you
In zentyal - http://doc.zentyal.org/en/backup.html
at the point "Data backup configuration in a Zentyal server"
in the image "general configuration" you can see there is user and password
in our installation one zentyal 3.3 and one 3.4 when you choose rsync there is not "password" field.
Thank you
17
Installation and Upgrades / Rsync best practice to synchronize two zentyal server or a NAS with Zentyal
« on: April 10, 2014, 08:09:29 pm »
Hello,
We have this two scenarios:
1)
A NAS as primary file server.
On the Zentyal server there is a share called BACKUP.
We need to rsync push all files and folders from the NAS to the Backup folder available on the zentyal server..
Is it possible to run this configuration?
The Rsync NAS configuration module it ask for the IP of remote server (that is the Zential IP) and user and password.
With a normal zentyal user it seems not working.
Is there a different user we need to set up?
2)
Two Zentyal servers one is "Primary domain controller" and the second one is an "additional domain controller"
On the primary domain we have samba with many shares full of files and folders
Every night we need to copy all of this files in the additional domain controller via rsync
Here we have the same question, how to set up this rsync configuration scenario, the best practice to do this task
Thanks a million !
We have this two scenarios:
1)
A NAS as primary file server.
On the Zentyal server there is a share called BACKUP.
We need to rsync push all files and folders from the NAS to the Backup folder available on the zentyal server..
Is it possible to run this configuration?
The Rsync NAS configuration module it ask for the IP of remote server (that is the Zential IP) and user and password.
With a normal zentyal user it seems not working.
Is there a different user we need to set up?
2)
Two Zentyal servers one is "Primary domain controller" and the second one is an "additional domain controller"
On the primary domain we have samba with many shares full of files and folders
Every night we need to copy all of this files in the additional domain controller via rsync
Here we have the same question, how to set up this rsync configuration scenario, the best practice to do this task
Thanks a million !
18
Installation and Upgrades / Antivirus behavior in Samba
« on: April 10, 2014, 07:41:07 pm »
Hello,
Zentyal 3.3 as VM used as Office server with many samba shares full of file and folders.
Another VM Windows 2008 R2 server with installed SyncBack Pro as backup software.
On zentyal the antivirus is up and running checking all the shares
have this scenario:
every night SyncBack Pro is configured to copy all file and folder from Zentyal to a NAS
The relative vfs objects = scannedonly module in samba generates for each file scanned by the antivirus some small files with name .scanned: files, .failed: files and .virus
as you can see here: https://www.samba.org/samba/docs/man/manpages/vfs_scannedonly.8.html
When SyncBack will run and read files in the source shares will see thousand of small files with tilde symbol like ~$myfile.someting, (instead of .scanned .failed .virus) etc., also many regular files will be blocked because the antivirus didn't scan them yet, also these file can not be deleted from users,etc., etc., and other related issues, that are quite annoying in a samba environment with hundreds of thousands of files
At the moment the only good solution was to disable the antivirus module and delete all the files .scanned .failed .virus with a linux command.
We need some suggestions how to fix this issue, we prefer to have the antivirus, but we need use SyncBack Pro as backup software as for customer request.
Thank you
Zentyal 3.3 as VM used as Office server with many samba shares full of file and folders.
Another VM Windows 2008 R2 server with installed SyncBack Pro as backup software.
On zentyal the antivirus is up and running checking all the shares
have this scenario:
every night SyncBack Pro is configured to copy all file and folder from Zentyal to a NAS
The relative vfs objects = scannedonly module in samba generates for each file scanned by the antivirus some small files with name .scanned: files, .failed: files and .virus
as you can see here: https://www.samba.org/samba/docs/man/manpages/vfs_scannedonly.8.html
When SyncBack will run and read files in the source shares will see thousand of small files with tilde symbol like ~$myfile.someting, (instead of .scanned .failed .virus) etc., also many regular files will be blocked because the antivirus didn't scan them yet, also these file can not be deleted from users,etc., etc., and other related issues, that are quite annoying in a samba environment with hundreds of thousands of files
At the moment the only good solution was to disable the antivirus module and delete all the files .scanned .failed .virus with a linux command.
We need some suggestions how to fix this issue, we prefer to have the antivirus, but we need use SyncBack Pro as backup software as for customer request.
Thank you
19
Installation and Upgrades / Issue adding a new clean zentyal installation to a Windows 2012 AD
« on: February 28, 2014, 05:18:12 pm »
Hi,
I am new on this forum, hello everybody !
Well I am new to Zentyal as well, I am testing this distribution in order to evaluate it's use for one customer that need a Linux Samba server, inside a Windows 2012 AD forest. In the future I'd like to implement this distribution to customer that need samba and other useful service in a mixed environment Win/linux or just for Linux environment.
But as soon as I start to study this distribution I encountered a problem:
I have just installed Zentyal on a Proxmox environment with Zentyal as OFFICE infrastructure, choose internal network card and standalone server with default hostname. zentyal and domain zentyal-domain.lan ( I have adopted this option because the one to add zentyal to an existing domain was giving me an error message stating that the domain should be zentyal domain and not the one installed on Windows 2012).
I need to join Zentyal to a Windows 2012 domain named test.local the server name is srv2012.test.local.
Well, when I choose in the server role "additional domain controller" and i fill-in all the fields but something goes wrong.
I followed tutorials and video guide, but all refer to old Zentyal version or are not detailed.
Please is there a clear and deep procedure example to show how to accomplish the join of an Win2012 AD?
thank you very much
Luciano
I am new on this forum, hello everybody
!Well I am new to Zentyal as well, I am testing this distribution in order to evaluate it's use for one customer that need a Linux Samba server, inside a Windows 2012 AD forest. In the future I'd like to implement this distribution to customer that need samba and other useful service in a mixed environment Win/linux or just for Linux environment.
But as soon as I start to study this distribution I encountered a problem:
I have just installed Zentyal on a Proxmox environment with Zentyal as OFFICE infrastructure, choose internal network card and standalone server with default hostname. zentyal and domain zentyal-domain.lan ( I have adopted this option because the one to add zentyal to an existing domain was giving me an error message stating that the domain should be zentyal domain and not the one installed on Windows 2012).
I need to join Zentyal to a Windows 2012 domain named test.local the server name is srv2012.test.local.
Well, when I choose in the server role "additional domain controller" and i fill-in all the fields but something goes wrong.
I followed tutorials and video guide, but all refer to old Zentyal version or are not detailed.
Please is there a clear and deep procedure example to show how to accomplish the join of an Win2012 AD?
thank you very much
Luciano
Pages: 1 [2]