Zentyal Forum, Linux Small Business Server
Zentyal Server => Installation and Upgrades => Topic started by: stanman on April 01, 2008, 07:53:04 am
-
hi, I'm having a bit trouble getting the mailserver to accept connections from the outside. Here's my setup:
wan -> router -> Lan. Somewhere on the lan there's the ebox sitting, if i port forward port 25 to my ebox, i can't telnet on port 25. If I portforward to an ubuntu machine (not ebox) i can connect. So somewhere in the firewall there's a problem letting port 25 tcp data in. Any suggestions? Thanks in advance
-
You must set a rule in "Firewall->Filtering rules for internal networks" which allows all incoming connections to tcp/25. To do so, previously, you must a create a service "Services->Add new" whose configuration consists of a destination port with "tcp/25" value.
I hope this helps.
-
nope, no luck yet.
I portforward my routers incoming tcp/25 data to the internal interface of the ebox (it only has one: eth0). If i don't have any rules set, i can still connect from a local ip to the box. Yet from the outside it's not possible.
Thanks for answering though. Any more suggestions?
-
Sorry, I made a mistake in the table to add this rule :-[.
The rule must be added in "Filtering rules from internal networks to eBox" table instead of the one saying above.
I'm apologised for this mistake.
-
hi, thanks. But stupid me found out there was no default gateway set :(
there's no need to setup any firewall rules to accept mail... Really dumb, sorry.
What a great system this is