This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
1
Installation and Upgrades / Start of Zentyal 2.3 ?
« on: November 25, 2011, 11:05:51 am »
Hello,
when will you start with Zentyal 2.3 ?
when will you start with Zentyal 2.3 ?
2
Installation and Upgrades / LDAP settings wrong - Old imported configuration with wrong (new) servername
« on: November 19, 2011, 04:43:22 pm »
Hello,
i used an old imported configuration, but LDAP has now the wrong servername (H2s --> NewServer3). How can i change this LDAP-settings ?
https://h2s/ebox/Users/Composite/Settings
i used an old imported configuration, but LDAP has now the wrong servername (H2s --> NewServer3). How can i change this LDAP-settings ?
https://h2s/ebox/Users/Composite/Settings
Code: [Select]
Basisdomänenname (Base DN): dc=H2s,dc=fritz,dc=box
Wurzeldomänenname (Root DN): cn=ebox,dc=H2s,dc=fritz,dc=box
Passwort: xxxx
Users DN: ou=Users,dc=H2s,dc=fritz,dc=box
Groups DN: ou=Groups,dc=H2s,dc=fritz,dc=box
3
Installation and Upgrades / <SOLVED> Intel Sandy Bridge - no network device found
« on: November 18, 2011, 10:00:07 pm »
Hello,
tried the Zentyal Installation with a Intel Sandy Bridge Motherboard, but it has problems with networking.
No device is recogniced.
After that i tried the Installation with a normal Ubuntu Server 10.04.03. The Installation was fine, but no networking here too.
I think, that it could be a driver problem.
Any hints or solution ?
tried the Zentyal Installation with a Intel Sandy Bridge Motherboard, but it has problems with networking.
No device is recogniced.
After that i tried the Installation with a normal Ubuntu Server 10.04.03. The Installation was fine, but no networking here too.
I think, that it could be a driver problem.
Any hints or solution ?
4
Installation and Upgrades / Zentyal 2.2-1 AMD64 stopped Installation at 84 % - Package zentyal-core
« on: November 12, 2011, 07:03:04 am »
Hello,
tried to install Zentyal 2.2-1 AMD64 on an server with an usbstick 2GB twice and it always stopping at 84% with package zentyal-core?
Made the stick with ubuntu 11.10 "create start medium", because the server has no DVD-Drive.
So, is there a problem with zentyal-core or iam doing something wrong ?
tried to install Zentyal 2.2-1 AMD64 on an server with an usbstick 2GB twice and it always stopping at 84% with package zentyal-core?
Made the stick with ubuntu 11.10 "create start medium", because the server has no DVD-Drive.
So, is there a problem with zentyal-core or iam doing something wrong ?
5
Installation and Upgrades / fullbackup - redis server error ?
« on: June 18, 2011, 10:24:57 am »
Hello,
made a fullbackup with:
Got an error:
Can i ignore that error or is my backup false ?
made a fullbackup with:
Code: [Select]
/usr/share/ebox-ebackup/ebox-remote-ebackup --full
Got an error:
Code: [Select]
Reconnecting to redis server (1 try)... at /usr/share/perl5/EBox/Config/Redis.pm line 567, <GEN10> line 1.
Reconnecting to redis server (1 try)... at /usr/share/perl5/EBox/Config/Redis.pm line 567, <GEN12> line 1.
Reconnecting to redis server (1 try)... at /usr/share/perl5/EBox/Config/Redis.pm line 567, <GEN14> line 1.
Reconnecting to redis server (1 try)... at /usr/share/perl5/EBox/Config/Redis.pm line 567, <GEN16> line 1.
Reconnecting to redis server (1 try)... at /usr/share/perl5/EBox/Config/Redis.pm line 567, <GEN18> line 1.
Reconnecting to redis server (1 try)... at /usr/share/perl5/EBox/Config/Redis.pm line 567, <GEN20> line 1.
Can i ignore that error or is my backup false ?
7
Installation and Upgrades / egroupware with kontact addressbook on zentyal not working?
« on: October 20, 2010, 07:32:14 pm »
Hello,
maybe anyone else has the following constellation:
Zentyal 2.x, with KDE 4.5.x and egroupware 1.6
When i try to connect my kontact addressbook (kaddressbook or kab) with GROUPDAV then i get the following message in /var/log/apache2/error.log
see also:
http://dev.egroupware.org/viewvc/egroupware/trunk/addressbook/inc/?view=log
Revision 28140
http://dev.egroupware.org/viewvc/egroupware?view=rev&revision=28140
maybe anyone else has the following constellation:
Zentyal 2.x, with KDE 4.5.x and egroupware 1.6
When i try to connect my kontact addressbook (kaddressbook or kab) with GROUPDAV then i get the following message in /var/log/apache2/error.log
Code: [Select]
PHP Fatal error: Cannot use object of type groupdav_propfind_iterator as array in /usr/share/egroupware/egw-pear/HTTP/WebDAV/Server.php on line 630
see also:
http://dev.egroupware.org/viewvc/egroupware/trunk/addressbook/inc/?view=log
Revision 28140
http://dev.egroupware.org/viewvc/egroupware?view=rev&revision=28140
8
Installation and Upgrades / [SOLVED] Error when enable ntp ?
« on: September 26, 2010, 10:53:43 am »
Hello, tried to enable ntp with apt-get install ntp and webGUI but always get an error.
Fresh installed zentyal 2.0x
Anyone else?
For details, see the bugticket:
http://trac.zentyal.org/ticket/2343
Fresh installed zentyal 2.0x
Anyone else?
For details, see the bugticket:
http://trac.zentyal.org/ticket/2343
9
Installation and Upgrades / Retrieve old calendar from eGroupware ?
« on: September 24, 2010, 11:32:24 pm »
Hello,
tried to migrate from 1.4.9 to 2.0.
Made a full backup, but now how to retrieve my calendar (eGroupware) from that duplicity archive?
tried to migrate from 1.4.9 to 2.0.
Made a full backup, but now how to retrieve my calendar (eGroupware) from that duplicity archive?
10
Installation and Upgrades / Migration from 1.4 to 2.0 ?
« on: September 05, 2010, 10:07:26 am »
Hello,
what is the best way to migrate from 1.4 to 2.0 ?
what is the best way to migrate from 1.4 to 2.0 ?
11
Installation and Upgrades / How to find out whats the reason for CRASH ? Help please!
« on: July 11, 2010, 07:28:40 pm »
Hello,
i have daily crashes and dont know why on my ebox 1.4.2 ?!
First, i thought it would be a time problem (ntp), but /var/log/syslog doesn't tell anything exactly so i deleted ntp.drift and tried again.
Now, i have this last messages in syslog:
At 14 clock starts my backup-session for about 10 - 20 minutes.
Maybe thats the reason or ebox-usersandgroups/slave-sync ?
http://forum.ebox-platform.com/index.php?topic=3242.0
i have daily crashes and dont know why on my ebox 1.4.2 ?!
First, i thought it would be a time problem (ntp), but /var/log/syslog doesn't tell anything exactly so i deleted ntp.drift and tried again.
Now, i have this last messages in syslog:
Code: [Select]
Jul 11 14:20:01 /USR/SBIN/CRON[10634]: (root) CMD (/usr/share/ebox-usersandgroups/slave-sync)
Jul 11 14:20:01 slapd[4571]: connection_read(35): no connection!
Jul 11 14:20:01 slapd[4571]: connection_read(35): no connection!
Jul 11 14:20:01 /USR/SBIN/CRON[10637]: (root) CMD (/usr/share/ebox/ebox-cronjob-runner >> /dev/null 2>&1)
Jul 11 14:20:01 slapd[4571]: connection_read(35): no connection!
Jul 11 14:20:01 slapd[4571]: connection_read(35): no connection!
Jul 11 14:20:03 slapd[4571]: connection_read(39): no connection!
Jul 11 14:20:04 last message repeated 5 times
Jul 11 14:20:04 slapd[4571]: connection_read(35): no connection!
Jul 11 14:20:04 slapd[4571]: connection_read(35): no connection!
Jul 11 14:20:19 slapd[4571]: <= bdb_equality_candidates: (mail) not indexed
Jul 11 14:20:19 slapd[4571]: <= bdb_equality_candidates: (mail) not indexed
Jul 11 14:20:19 dovecot: pop3-login: Login: user=<xx@>, method=PLAIN, rip=x.x.x., lip=x.x.x.x, TLS
Jul 11 14:20:19 dovecot: POP3(xx@): Connection closed top=1/3404, retr=0/0, del=0/1, size=28130
CRASH
Jul 11 19:07:24 syslogd 1.5.0#1ubuntu1: restart.
At 14 clock starts my backup-session for about 10 - 20 minutes.
Maybe thats the reason or ebox-usersandgroups/slave-sync ?
http://forum.ebox-platform.com/index.php?topic=3242.0
12
Installation and Upgrades / [SOLVED] Wrong HTTP referer ?
« on: June 23, 2010, 02:14:53 pm »
Since today, iam not able to edit users&groups, egroupware Default applications and so on.
ebox 1.4-2
The error message is:
My mistake or was something changed?
ebox 1.4-2
The error message is:
Quote
Wrong HTTP referer detected, operation cancelled for security reasons
An internal error related to a template has occurred. This is a bug, relevant information can be found in the logs.
My mistake or was something changed?
Pages: [1]