This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
1
Installation and Upgrades / Mail problem
« on: December 11, 2009, 07:53:22 am »
Hello
I have a problem sending mails. Postfix retuns:
Dec 11 08:49:28 srv01 postfix/error[11127]: 165225C484: to=<vlados.01@gmail.com>, relay=none, delay=0.07, delays=0.02/0.03/0/0.03, dsn=4.3.5, status=deferred (delivery temporarily suspended: mail for netlabs.bg loops back to myself)
vladislav@srv01:~$ host netlabs.bg
netlabs.bg has address 78.90.82.221
netlabs.bg mail is handled by 1 ns2.netlabs.bg.
vladislav@srv01:~$ host ns2.netlabs.bg
ns2.netlabs.bg has address 78.90.82.89
vladislav@srv01:~$
What i did wrong?
I have a problem sending mails. Postfix retuns:
Dec 11 08:49:28 srv01 postfix/error[11127]: 165225C484: to=<vlados.01@gmail.com>, relay=none, delay=0.07, delays=0.02/0.03/0/0.03, dsn=4.3.5, status=deferred (delivery temporarily suspended: mail for netlabs.bg loops back to myself)
vladislav@srv01:~$ host netlabs.bg
netlabs.bg has address 78.90.82.221
netlabs.bg mail is handled by 1 ns2.netlabs.bg.
vladislav@srv01:~$ host ns2.netlabs.bg
ns2.netlabs.bg has address 78.90.82.89
vladislav@srv01:~$
What i did wrong?
2
Installation and Upgrades / Change ebox $nameserverHostname
« on: October 31, 2009, 09:45:13 pm »
How I can change this variable in ebox? /bin/hostname returns "srv01", but in ebox is "ns"
3
Installation and Upgrades / DNS and SOA records
« on: October 27, 2009, 09:29:52 pm »
I added a new domain: netlabs.bg
Added and two hostnames: ns1 (78.90.82.221) and ns2 (78.90.82.89)
After save I noticed that ebox added and ns.netlabs.bg as a nameserver in the bind config:
How to change that and tell that ns1 & ns2 are the nameservers?
Added and two hostnames: ns1 (78.90.82.221) and ns2 (78.90.82.89)
After save I noticed that ebox added and ns.netlabs.bg as a nameserver in the bind config:
Quote
$TTL 3D
@ IN SOA ns.netlabs.bg. admin.example.com. (
2009102714 ;serial number
8H ;refresh
2H ;retry
4W ;expiration
1D ) ;
;
NS ns.netlabs.bg. ;nameserver
;
A 78.90.82.221
ns A 127.0.0.1
ns1 A 78.90.82.221
www CNAME ns1
ns2 A 78.90.82.89
@ MX 10 netlabs.bg.
How to change that and tell that ns1 & ns2 are the nameservers?
4
Installation and Upgrades / Virtual Interfaces
« on: October 19, 2009, 05:00:00 pm »
Hi,
I added a second ip to my external network interface. It can bi ping from the internal network, but it can't from the outside. What I should do?
I added a second ip to my external network interface. It can bi ping from the internal network, but it can't from the outside. What I should do?
5
Installation and Upgrades / /data/js/prototype.js Not found
« on: September 27, 2009, 11:01:52 pm »
I really don't what happen but the apache can't find the js files for the ebox web gui.
I tried to find the apache config for the ebox without any luck.
Help?
I tried to find the apache config for the ebox without any luck.
Help?
6
Installation and Upgrades / Unable to access internet
« on: August 30, 2009, 01:05:07 pm »
I set up a DHCP server, but when I connect thought the server I am unable to access internet.
The dhcp server works fine and returns me the correct configuration for the client ip.
The dns returns the correct ip, but when I ping the ip of some site it returns me - request time out.
I tried to turn the firewall off to test, but the problem still exists.
ifconfig:
The dhcp server works fine and returns me the correct configuration for the client ip.
The dns returns the correct ip, but when I ping the ip of some site it returns me - request time out.
I tried to turn the firewall off to test, but the problem still exists.
ifconfig:
Quote
root@netlabs:/home/vladi# ifconfig
eth0 Link encap:Ethernet HWaddr 00:10:5a:99:4f:0f
inet addr:192.168.2.1 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::210:5aff:fe99:4f0f/64 Scope:Link
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:6396 errors:175 dropped:0 overruns:0 frame:176
TX packets:3272 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:844754 (824.9 KB) TX bytes:1432994 (1.3 MB)
Interrupt:16 Base address:0x4000
eth2 Link encap:Ethernet HWaddr 00:1d:0f:c0:ec:8e
inet addr:78.90.82.221 Bcast:78.90.82.255 Mask:255.255.255.0
inet6 addr: fe80::21d:fff:fec0:ec8e/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:50406 errors:0 dropped:0 overruns:0 frame:0
TX packets:16374 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:13484946 (12.8 MB) TX bytes:3415528 (3.2 MB)
Interrupt:19 Base address:0xd000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:10755 errors:0 dropped:0 overruns:0 frame:0
TX packets:10755 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:4640506 (4.4 MB) TX bytes:4640506 (4.4 MB)
Quote
root@netlabs:/home/vladi# cat /etc/dhcp3/dhcpd.conf
# DHCP server is authoritative for all networks
authoritative;
# extra options
# RFC3442 routes
option rfc3442-classless-static-routes code 121 = array of integer 8;
# MS routes
option ms-classless-static-routes code 249 = array of integer 8;
ddns-update-style none;
option domain-name-servers 78.90.82.1, 89.190.192.162;
default-lease-time 1800;
max-lease-time 7200;
shared-network eth2 {
subnet 78.90.82.0 netmask 255.255.255.0 {
option routers 78.90.82.1;
option domain-name-servers 78.90.82.221;
default-lease-time 1800;
max-lease-time 7200;
}
}
shared-network eth0 {
subnet 192.168.2.0 netmask 255.255.255.0 {
option routers 192.168.2.1;
option domain-name-servers 192.168.2.1, 78.90.82.1;
default-lease-time 1800;
max-lease-time 7200;
range 192.168.2.5 192.168.2.10;
}
}
7
Installation and Upgrades / SMTP Problem
« on: August 04, 2009, 12:20:22 am »
Hi,
I reinstalled my Ebox with the stable Ubuntu 8.04 and ebox - 1.2 and now I have a problem I cannot send mail with the smtp
I configured all correctly but when I select to use TLS in the Outlook it changes the port 587. The port 587 is closed corresponding to ping.eu
What i miss?
I reinstalled my Ebox with the stable Ubuntu 8.04 and ebox - 1.2 and now I have a problem I cannot send mail with the smtp
I configured all correctly but when I select to use TLS in the Outlook it changes the port 587. The port 587 is closed corresponding to ping.eu
What i miss?
8
Installation and Upgrades / ebox & Ubuntu 9.04
« on: July 18, 2009, 05:02:12 pm »
How I can install ebox-mail on Ubuntu 9.04 (x64)? I installed the ebox, but I can found the ebox-mail in the aptitude.
This is the list of the modules that i have: https://help.ubuntu.com/9.04/serverguide/C/ebox.html#ebox-modules
This is the list of the modules that i have: https://help.ubuntu.com/9.04/serverguide/C/ebox.html#ebox-modules
9
Installation and Upgrades / [1.2] install problem
« on: July 14, 2009, 07:44:37 pm »
I have downloaded the iso with the new version (1.2) and do a clean install of the ebox
Now I can not access the web UI. Probably the firewall?
vladi@office:~$ ping 78.90.82.221
PING 78.90.82.221 (78.90.82.221) 56(84) bytes of data.
64 bytes from 78.90.82.221: icmp_seq=1 ttl=254 time=3.12 ms
64 bytes from 78.90.82.221: icmp_seq=6 ttl=254 time=3.36 ms
64 bytes from 78.90.82.221: icmp_seq=7 ttl=254 time=3.08 ms
--- 78.90.82.221 ping statistics ---
7 packets transmitted, 7 received, 0% packet loss, time 6017ms
rtt min/avg/max/mdev = 2.625/3.048/3.363/0.211 ms
vladi@office:~$ lynx -dump 78.90.82.221
Now I can not access the web UI. Probably the firewall?
vladi@office:~$ ping 78.90.82.221
PING 78.90.82.221 (78.90.82.221) 56(84) bytes of data.
64 bytes from 78.90.82.221: icmp_seq=1 ttl=254 time=3.12 ms
64 bytes from 78.90.82.221: icmp_seq=6 ttl=254 time=3.36 ms
64 bytes from 78.90.82.221: icmp_seq=7 ttl=254 time=3.08 ms
--- 78.90.82.221 ping statistics ---
7 packets transmitted, 7 received, 0% packet loss, time 6017ms
rtt min/avg/max/mdev = 2.625/3.048/3.363/0.211 ms
vladi@office:~$ lynx -dump 78.90.82.221
10
Installation and Upgrades / ebox - monitor - bug
« on: May 02, 2009, 12:00:34 am »
A really nasty bug has occurred
Exception
rrdtool fetch /var/lib/collectd/rrd/server01/thermal/temperature-temperature.rrd AVERAGE -s end-1h -e 1241215150 failed. Error output: ERROR: opening '/var/lib/collectd/rrd/server01/thermal/temperature-temperature.rrd': No such file or directory Command output: . Exit value: 1
Trace
rrdtool fetch /var/lib/collectd/rrd/server01/thermal/temperature-temperature.rrd AVERAGE -s end-1h -e 1241215150 failed.
Error output: ERROR: opening '/var/lib/collectd/rrd/server01/thermal/temperature-temperature.rrd': No such file or directory
Command output: .
Exit value: 1 at /usr/share/perl5/EBox/Sudo.pm line 113
EBox::Sudo::_commandError('rrdtool fetch /var/lib/collectd/rrd/server01/thermal/temperat...', 256, 'ARRAY(0x906d654)', 'ARRAY(0x8a95200)') called at /usr/share/perl5/EBox/Sudo.pm line 90
EBox::Sudo::command('rrdtool fetch /var/lib/collectd/rrd/server01/thermal/temperat...') called at /usr/share/perl5/EBox/Monitor/Measure/Base.pm line 210
EBox::Monitor::Measure::Base::fetchData('EBox::Monitor::Measure::Thermal=HASH(0xa078818)', 'resolution', 10, 'start', 'end-1h') called at /usr/share/perl5/EBox/Monitor.pm line 267
EBox::Monitor::allMeasuredData('EBox::Monitor=HASH(0xa4cb588)') called at /usr/share/perl5/EBox/CGI/Monitor/Index.pm line 65
EBox::CGI::Monitor::Index::masonParameters('EBox::CGI::Monitor::Index=HASH(0x8fb0340)') called at /usr/share/perl5/EBox/CGI/Base.pm line 516
EBox::CGI::Base::_process('EBox::CGI::Monitor::Index=HASH(0x8fb0340)') called at /usr/share/perl5/EBox/CGI/Base.pm line 261
EBox::CGI::Base::run('EBox::CGI::Monitor::Index=HASH(0x8fb0340)') called at /usr/share/perl5/EBox/CGI/Run.pm line 107
EBox::CGI::Run::run('EBox::CGI::Run', 'Monitor/Index', 'EBox') called at /usr/share/ebox/cgi/ebox.cgi line 19
ModPerl::ROOT::ModPerl::Registry::usr_share_ebox_cgi_ebox_2ecgi::handler('Apache2::RequestRec=SCALAR(0x8fb04a8)') called at /usr/lib/perl5/ModPerl/RegistryCooker.pm line 204
eval {...} called at /usr/lib/perl5/ModPerl/RegistryCooker.pm line 204
ModPerl::RegistryCooker::run('ModPerl::Registry=HASH(0x8fb0574)') called at /usr/lib/perl5/ModPerl/RegistryCooker.pm line 170
ModPerl::RegistryCooker::default_handler('ModPerl::Registry=HASH(0x8fb0574)') called at /usr/lib/perl5/ModPerl/Registry.pm line 31
ModPerl::Registry::handler('ModPerl::Registry', 'Apache2::RequestRec=SCALAR(0x8fb04a8)') called at -e line 0
eval {...} called at -e line 0
Exception
rrdtool fetch /var/lib/collectd/rrd/server01/thermal/temperature-temperature.rrd AVERAGE -s end-1h -e 1241215150 failed. Error output: ERROR: opening '/var/lib/collectd/rrd/server01/thermal/temperature-temperature.rrd': No such file or directory Command output: . Exit value: 1
Trace
rrdtool fetch /var/lib/collectd/rrd/server01/thermal/temperature-temperature.rrd AVERAGE -s end-1h -e 1241215150 failed.
Error output: ERROR: opening '/var/lib/collectd/rrd/server01/thermal/temperature-temperature.rrd': No such file or directory
Command output: .
Exit value: 1 at /usr/share/perl5/EBox/Sudo.pm line 113
EBox::Sudo::_commandError('rrdtool fetch /var/lib/collectd/rrd/server01/thermal/temperat...', 256, 'ARRAY(0x906d654)', 'ARRAY(0x8a95200)') called at /usr/share/perl5/EBox/Sudo.pm line 90
EBox::Sudo::command('rrdtool fetch /var/lib/collectd/rrd/server01/thermal/temperat...') called at /usr/share/perl5/EBox/Monitor/Measure/Base.pm line 210
EBox::Monitor::Measure::Base::fetchData('EBox::Monitor::Measure::Thermal=HASH(0xa078818)', 'resolution', 10, 'start', 'end-1h') called at /usr/share/perl5/EBox/Monitor.pm line 267
EBox::Monitor::allMeasuredData('EBox::Monitor=HASH(0xa4cb588)') called at /usr/share/perl5/EBox/CGI/Monitor/Index.pm line 65
EBox::CGI::Monitor::Index::masonParameters('EBox::CGI::Monitor::Index=HASH(0x8fb0340)') called at /usr/share/perl5/EBox/CGI/Base.pm line 516
EBox::CGI::Base::_process('EBox::CGI::Monitor::Index=HASH(0x8fb0340)') called at /usr/share/perl5/EBox/CGI/Base.pm line 261
EBox::CGI::Base::run('EBox::CGI::Monitor::Index=HASH(0x8fb0340)') called at /usr/share/perl5/EBox/CGI/Run.pm line 107
EBox::CGI::Run::run('EBox::CGI::Run', 'Monitor/Index', 'EBox') called at /usr/share/ebox/cgi/ebox.cgi line 19
ModPerl::ROOT::ModPerl::Registry::usr_share_ebox_cgi_ebox_2ecgi::handler('Apache2::RequestRec=SCALAR(0x8fb04a8)') called at /usr/lib/perl5/ModPerl/RegistryCooker.pm line 204
eval {...} called at /usr/lib/perl5/ModPerl/RegistryCooker.pm line 204
ModPerl::RegistryCooker::run('ModPerl::Registry=HASH(0x8fb0574)') called at /usr/lib/perl5/ModPerl/RegistryCooker.pm line 170
ModPerl::RegistryCooker::default_handler('ModPerl::Registry=HASH(0x8fb0574)') called at /usr/lib/perl5/ModPerl/Registry.pm line 31
ModPerl::Registry::handler('ModPerl::Registry', 'Apache2::RequestRec=SCALAR(0x8fb04a8)') called at -e line 0
eval {...} called at -e line 0
11
Installation and Upgrades / Change the Administration port or host
« on: April 11, 2009, 03:43:14 pm »
How I can change the port of the administration port or make the UI opens only for one host.
I want to be able to open the different VHosts with SSL
I want to be able to open the different VHosts with SSL
12
Installation and Upgrades / Tunnel
« on: March 08, 2009, 12:56:43 pm »
How can I setup a tunnel on some port with the ebox?
13
Installation and Upgrades / File transfer
« on: January 25, 2009, 07:18:12 pm »
Hei. I am a new one to the ebox (javi knows it )
So my question is. The only way to transfer files to the ebox is with openvpn & samba or with ProFTP with LDAP authorization?
Is there some tutorial how to setup the vpn?
So my question is. The only way to transfer files to the ebox is with openvpn & samba or with ProFTP with LDAP authorization?
Is there some tutorial how to setup the vpn?
14
Installation and Upgrades / Ebox Update
« on: January 09, 2009, 02:52:06 pm »
How to update to the latest build (12034) or how can use the latest development version?
15
Installation and Upgrades / Some questions
« on: January 01, 2009, 11:11:10 pm »
First of all I want to ask if someone can explain me how to setup the DNS module. I installed the ebox on a single server for a small web hosting. I pointed some domains to the ip of the ebox server but what i should add to the DNS module?
The second question is how to disable the home folders for the Samba?
And when i add user from the ebox how can I enable the ssh for this user?
The second question is how to disable the home folders for the Samba?
And when i add user from the ebox how can I enable the ssh for this user?
Pages: [1]