Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
1
Installation and Upgrades / Re: SSL Error after netbios name change
« on: July 03, 2015, 03:58:52 pm »
Anybody?
2
Installation and Upgrades / SSL Error after netbios name change
« on: July 02, 2015, 08:21:34 pm »
Hi,
If I install, then change my netbios name, I get a protocol error from Chrome when going to the webmail site. The admin interface still works.
The same happens when I do system updates.
To test:
1. install 4.1
2. change netbios name
3. goto https://url/SOGo
Has anyone seen this before, or got a solution?
Gerald
If I install, then change my netbios name, I get a protocol error from Chrome when going to the webmail site. The admin interface still works.
The same happens when I do system updates.
To test:
1. install 4.1
2. change netbios name
3. goto https://url/SOGo
Has anyone seen this before, or got a solution?
Gerald
3
Installation and Upgrades / Re: Zentyal 4.1 corupts AD, disconnects accounts from exchange 2003 mail boxes
« on: April 28, 2015, 09:09:53 pm »
No response is a common theme here. I'm not quite sure why Zentyal has a Community version, though they have changed the name to 'Development'.
4
Installation and Upgrades / Re: Folders not synching between IMAP and MAPI
« on: April 21, 2015, 07:34:46 pm »
I'd thought MAPI/IMAP syncing was one of the core functionalities of Zentyal. Having this issue for so long is unexpected and disheartening.
5
Installation and Upgrades / Re: Folders not synching between IMAP and MAPI
« on: April 20, 2015, 11:30:16 pm »
Does anyone know what's going on here?
6
Installation and Upgrades / Re: Folders not synching between IMAP and MAPI
« on: March 27, 2015, 03:33:21 pm »
This can't be right. No accounts have the same folders between IMAP and MAPI. IMAP and the web page are the same.
Gerald
Gerald
7
Installation and Upgrades / Folders not synching between IMAP and MAPI
« on: March 26, 2015, 11:18:35 pm »
Hi,
I've connected Outlook 2003 to my Zentyal 4.0 install, and imported data from a PST file. It works not too bad, except for syncing issues.
The Web interface and Thunderbird IMAP do not show all the folder that out look shows. I have INBOX, Sent, Draft, Outbox, but none of the folders I created.
So, I created a folder in Oitloo called bob1. It did not dhow up in the Web interface or Thunderbird.
I created a folder in Thunderbird called bob2, it show up in the web interface, but NOT in outlook.
Is this normal?
Gerald
I've connected Outlook 2003 to my Zentyal 4.0 install, and imported data from a PST file. It works not too bad, except for syncing issues.
The Web interface and Thunderbird IMAP do not show all the folder that out look shows. I have INBOX, Sent, Draft, Outbox, but none of the folders I created.
So, I created a folder in Oitloo called bob1. It did not dhow up in the Web interface or Thunderbird.
I created a folder in Thunderbird called bob2, it show up in the web interface, but NOT in outlook.
Is this normal?
Gerald
8
Installation and Upgrades / DNS Not updated when using Microsoft AD Tools
« on: March 26, 2015, 08:15:45 pm »
Hi,
I installed the Microsoft Active Directory tools on my WIndows 7 box, which is part of the domain on Zentyal. Using the tools, I added a couple of DNS entries. Those entries do not appear in the web interface. Is what I'm seeing normal?
I'd prefer to use the MS tools, since I can type in the new name and IP address without having to click on a bunch of icons. Zentyal should allow adding a new hostname and IP in a single dialog box.
Gerald
I installed the Microsoft Active Directory tools on my WIndows 7 box, which is part of the domain on Zentyal. Using the tools, I added a couple of DNS entries. Those entries do not appear in the web interface. Is what I'm seeing normal?
I'd prefer to use the MS tools, since I can type in the new name and IP address without having to click on a bunch of icons. Zentyal should allow adding a new hostname and IP in a single dialog box.
Gerald
9
Installation and Upgrades / Re: Kerberos failing - can't join domain
« on: March 26, 2015, 04:45:06 pm »
I logged onto the web interface using the same admin credential that were failing. I went to manage users, clicked on the admin, and set the password. I set the password to what it already was.
I then tried to join the domain again, and it worked.
I then tried to join the domain again, and it worked.
10
Installation and Upgrades / [SOLVED] Kerberos failing - can't join domain
« on: March 26, 2015, 04:29:39 pm »
Hi,
I'm trying to add a machine to the domain, but it's not authenticating my admin user:
[2015/03/26 10:16:37.597537, 3] ../source4/auth/kerberos/krb5_init_context.c:80(smb_krb5_debug_wrapper)
Kerberos: AS-REQ administrator@erlphase.com from ipv4:192.168.100.141:49196 for krbtgt/erlphase.com@erlphase.com
[2015/03/26 10:16:37.599574, 3] ../source4/auth/kerberos/krb5_init_context.c:80(smb_krb5_debug_wrapper)
Kerberos: Client sent patypes: ENC-TS, 128
[2015/03/26 10:16:37.599676, 3] ../source4/auth/kerberos/krb5_init_context.c:80(smb_krb5_debug_wrapper)
Kerberos: Looking for PK-INIT(ietf) pa-data -- administrator@erlphase.com
[2015/03/26 10:16:37.599733, 3] ../source4/auth/kerberos/krb5_init_context.c:80(smb_krb5_debug_wrapper)
Kerberos: Looking for PK-INIT(win2k) pa-data -- administrator@erlphase.com
[2015/03/26 10:16:37.599795, 3] ../source4/auth/kerberos/krb5_init_context.c:80(smb_krb5_debug_wrapper)
Kerberos: Looking for ENC-TS pa-data -- administrator@erlphase.com
[2015/03/26 10:16:37.599870, 3] ../source4/auth/kerberos/krb5_init_context.c:80(smb_krb5_debug_wrapper)
Kerberos: Failed to decrypt PA-DATA -- administrator@erlphase.com (enctype arcfour-hmac-md5) error Decrypt integrity check failed
[2015/03/26 10:16:37.599953, 3] ../source4/auth/kerberos/krb5_init_context.c:80(smb_krb5_debug_wrapper)
Kerberos: Need to use PA-ENC-TIMESTAMP/PA-PK-AS-REQ
[2015/03/26 10:16:37.600609, 3] ../source4/smbd/service_stream.c:66(stream_terminate_connection)
Terminating connection - 'kdc_tcp_call_loop: tstream_read_pdu_blob_recv() - NT_STATUS_CONNECTION_DISCONNECTED'
[2015/03/26 10:16:37.600687, 3] ../source4/smbd/process_single.c:114(single_terminate)
single_terminate: reason[kdc_tcp_call_loop: tstream_read_pdu_blob_recv() - NT_STATUS_CONNECTION_DISCONNECTED]
The 'Decrypt integrity check failed is new.
Any ideas?
Gerald
I'm trying to add a machine to the domain, but it's not authenticating my admin user:
[2015/03/26 10:16:37.597537, 3] ../source4/auth/kerberos/krb5_init_context.c:80(smb_krb5_debug_wrapper)
Kerberos: AS-REQ administrator@erlphase.com from ipv4:192.168.100.141:49196 for krbtgt/erlphase.com@erlphase.com
[2015/03/26 10:16:37.599574, 3] ../source4/auth/kerberos/krb5_init_context.c:80(smb_krb5_debug_wrapper)
Kerberos: Client sent patypes: ENC-TS, 128
[2015/03/26 10:16:37.599676, 3] ../source4/auth/kerberos/krb5_init_context.c:80(smb_krb5_debug_wrapper)
Kerberos: Looking for PK-INIT(ietf) pa-data -- administrator@erlphase.com
[2015/03/26 10:16:37.599733, 3] ../source4/auth/kerberos/krb5_init_context.c:80(smb_krb5_debug_wrapper)
Kerberos: Looking for PK-INIT(win2k) pa-data -- administrator@erlphase.com
[2015/03/26 10:16:37.599795, 3] ../source4/auth/kerberos/krb5_init_context.c:80(smb_krb5_debug_wrapper)
Kerberos: Looking for ENC-TS pa-data -- administrator@erlphase.com
[2015/03/26 10:16:37.599870, 3] ../source4/auth/kerberos/krb5_init_context.c:80(smb_krb5_debug_wrapper)
Kerberos: Failed to decrypt PA-DATA -- administrator@erlphase.com (enctype arcfour-hmac-md5) error Decrypt integrity check failed
[2015/03/26 10:16:37.599953, 3] ../source4/auth/kerberos/krb5_init_context.c:80(smb_krb5_debug_wrapper)
Kerberos: Need to use PA-ENC-TIMESTAMP/PA-PK-AS-REQ
[2015/03/26 10:16:37.600609, 3] ../source4/smbd/service_stream.c:66(stream_terminate_connection)
Terminating connection - 'kdc_tcp_call_loop: tstream_read_pdu_blob_recv() - NT_STATUS_CONNECTION_DISCONNECTED'
[2015/03/26 10:16:37.600687, 3] ../source4/smbd/process_single.c:114(single_terminate)
single_terminate: reason[kdc_tcp_call_loop: tstream_read_pdu_blob_recv() - NT_STATUS_CONNECTION_DISCONNECTED]
The 'Decrypt integrity check failed is new.
Any ideas?
Gerald
11
Installation and Upgrades / per user or per group login scripts
« on: March 20, 2015, 08:31:11 pm »
Hi,
Is there a way to have per user or per group login scripts?
Gerald
Is there a way to have per user or per group login scripts?
Gerald
12
Installation and Upgrades / Repllace SBS 2003 SP2
« on: March 13, 2015, 08:14:32 pm »
Hi,
I have a Small Business Server 2003 SP2. I do not have R2 (these guys never kept up to date).
It seems Zentyal 4.0 can't become an additional domain controller for SP2. I was hoping to set it up that way to ease transference.
Is there an easy way to get my users data, etc from SP2 to Zentyal 4.0?
Gerald
I have a Small Business Server 2003 SP2. I do not have R2 (these guys never kept up to date).
It seems Zentyal 4.0 can't become an additional domain controller for SP2. I was hoping to set it up that way to ease transference.
Is there an easy way to get my users data, etc from SP2 to Zentyal 4.0?
Gerald
13
Installation and Upgrades / Re: SPAM and VIRUS quarantine
« on: February 03, 2015, 01:51:55 pm »
Hi,
Yup, my SPAM gets passed through, viruses do not, which is great.
We currently use McAfee (used to be mxLogics) to pre-scan our emails (they also cache emails if our server is down). When an email is marked as SPAM or VIRUS, they do not pass it through, but they do store the emails for a certain number of days. I then have the chance to release the email if it is from a known, trusted person. Some of the attachments we get are incorrectly marked as viruses.
Are there plans for Zentyal to become more full featured in this area, so I can stop paying McAffee to do it for us?
Gerald
Yup, my SPAM gets passed through, viruses do not, which is great.
We currently use McAfee (used to be mxLogics) to pre-scan our emails (they also cache emails if our server is down). When an email is marked as SPAM or VIRUS, they do not pass it through, but they do store the emails for a certain number of days. I then have the chance to release the email if it is from a known, trusted person. Some of the attachments we get are incorrectly marked as viruses.
Are there plans for Zentyal to become more full featured in this area, so I can stop paying McAffee to do it for us?
Gerald
14
Installation and Upgrades / Transfer of VPN Data
« on: January 16, 2015, 01:41:33 pm »
Hi,
I'm running a 3.4 server for VPN and firewall only, and I'd like to move to a 4.0 one. I know I could do an upgrade, but this box has always had issues with squid not running (even after upgrades), so I'd like to try from scratch.
Is there an easy was to move all of my VPN users and certs to the new machine? Maybe my firewall rules as well.
Gerald
I'm running a 3.4 server for VPN and firewall only, and I'd like to move to a 4.0 one. I know I could do an upgrade, but this box has always had issues with squid not running (even after upgrades), so I'd like to try from scratch.
Is there an easy was to move all of my VPN users and certs to the new machine? Maybe my firewall rules as well.
Gerald
15
Installation and Upgrades / SPAM and VIRUS quarantine
« on: January 16, 2015, 01:38:39 pm »
Hi,
Does Zentyal store its virus and spam emails anywhere? We occasionally get emails marked as a virus, yet we trust the sender. How can I release the email and have it delivered to the end user?
Gerald
Does Zentyal store its virus and spam emails anywhere? We occasionally get emails marked as a virus, yet we trust the sender. How can I release the email and have it delivered to the end user?
Gerald