Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
1
Installation and Upgrades / Zentyal 2.2 antivirus not updating
« on: May 05, 2012, 01:46:07 pm »
Hi all,
Cannot update the antivirus getting following messages anyway to resolve?
ClamAV update process started at Sat May 5 20:30:32 2012
main.cvd is up to date (version: 54, sigs: 1044387, f-level: 60, builder: sven)
WARNING: Current functionality level = 58, recommended = 60
Please check if ClamAV tools are linked against the proper version of libclamav
DON'T PANIC! Read http://www.clamav.net/support/faq
WARNING: getpatch: Can't download daily-14829.cdiff from db.local.clamav.net
WARNING: getpatch: Can't download daily-14829.cdiff from db.local.clamav.net
WARNING: getpatch: Can't download daily-14829.cdiff from db.local.clamav.net
WARNING: getpatch: Can't download daily-14829.cdiff from db.local.clamav.net
WARNING: getpatch: Can't download daily-14829.cdiff from db.local.clamav.net
WARNING: Incremental update failed, trying to download daily.cvd
WARNING: Can't download daily.cvd from db.local.clamav.net
Trying again in 5 secs...
TIA
Eric
Cannot update the antivirus getting following messages anyway to resolve?
ClamAV update process started at Sat May 5 20:30:32 2012
main.cvd is up to date (version: 54, sigs: 1044387, f-level: 60, builder: sven)
WARNING: Current functionality level = 58, recommended = 60
Please check if ClamAV tools are linked against the proper version of libclamav
DON'T PANIC! Read http://www.clamav.net/support/faq
WARNING: getpatch: Can't download daily-14829.cdiff from db.local.clamav.net
WARNING: getpatch: Can't download daily-14829.cdiff from db.local.clamav.net
WARNING: getpatch: Can't download daily-14829.cdiff from db.local.clamav.net
WARNING: getpatch: Can't download daily-14829.cdiff from db.local.clamav.net
WARNING: getpatch: Can't download daily-14829.cdiff from db.local.clamav.net
WARNING: Incremental update failed, trying to download daily.cvd
WARNING: Can't download daily.cvd from db.local.clamav.net
Trying again in 5 secs...
TIA
Eric
2
Installation and Upgrades / Re: Jabber IM setup
« on: January 30, 2012, 04:47:03 am »
Hi Remon,
Actually I have no Idea just deleted the module and reinstall it and it just worked. Anyway they are testing it so I will know if there are any problems. Space is not a concern as they are prepared to invest into storage as they need all chats to have records. But want to know if used as it is, will they be able to delete their own chat history on the server?
TIA Eric
Actually I have no Idea just deleted the module and reinstall it and it just worked. Anyway they are testing it so I will know if there are any problems. Space is not a concern as they are prepared to invest into storage as they need all chats to have records. But want to know if used as it is, will they be able to delete their own chat history on the server?
TIA Eric
3
Installation and Upgrades / Re: Jabber IM setup
« on: January 26, 2012, 03:03:15 am »
Thanks Remon and Whatleydesigns. I have the IM running and it is accessible from inside outside and from vpn 
. I have another question is whether users can delete their chat history. I wish to not be able delete and chat history and must be kept for at least a year. Is this possible?
TIA
Eric
. I have another question is whether users can delete their chat history. I wish to not be able delete and chat history and must be kept for at least a year. Is this possible?TIA
Eric
4
Installation and Upgrades / IM Jabber
« on: January 18, 2012, 05:55:46 pm »
Hi all,
Just want to know if its possible to prevent all users from deleting chat history?
TIA
Eric
Just want to know if its possible to prevent all users from deleting chat history?
TIA
Eric
5
Installation and Upgrades / Re: Jabber IM setup
« on: January 13, 2012, 06:37:07 am »
Hi ctek,
Thanks for taking the time to reply. I think Jabber is broken in zentyal and cannot work atm. Hopefully it will be fixed in the next version.
Tks
Eric
Thanks for taking the time to reply. I think Jabber is broken in zentyal and cannot work atm. Hopefully it will be fixed in the next version.
Tks
Eric
6
Installation and Upgrades / Re: Jabber IM setup
« on: January 11, 2012, 04:44:34 pm »
Please anyone? At least a direction on how to diagnose the problem?
TIA
Eric
TIA
Eric
7
Installation and Upgrades / Jabber IM setup
« on: January 11, 2012, 04:56:56 am »
Hi all,
I am having extreme difficulty in setting up the jabber IM chat. Please if any one has a step by step tutorial it would be great. The problem I am having is that any type of xmpp client I use cannot connect to the server within the LAN. The modules I am running are :-
Zentyal Server 2.2.4 64bit
Network
Firewall
Antivirus
Backup
Events
IPsec
Logs
Mail Filter
Monitoring
VPN
Users and Groups
Web Server
VoIP
Jabber
Mail
File Sharing
User Corner
Webmail
Groupware
Printer Sharing
TIA
Eric
I am having extreme difficulty in setting up the jabber IM chat. Please if any one has a step by step tutorial it would be great. The problem I am having is that any type of xmpp client I use cannot connect to the server within the LAN. The modules I am running are :-
Zentyal Server 2.2.4 64bit
Network
Firewall
Antivirus
Backup
Events
IPsec
Logs
Mail Filter
Monitoring
VPN
Users and Groups
Web Server
VoIP
Jabber
File Sharing
User Corner
Webmail
Groupware
Printer Sharing
TIA
Eric
8
Installation and Upgrades / Re: Vitualisation Of Zentyal 2.2
« on: November 15, 2011, 03:51:52 pm »
I use debian squeeze and XEN 4.0.1 and run zentyal 2.2 on it with pfsense, elastix, zone minder and all with pci pass thru. Internal LAN I get an average of about 50-70 MB/s transfer rate and full 10Mbps internet, serving about 10 - 15 users and VPN. My system runs on
AMD Phenom II X6 1075T
Gigabyte GA-890FXA-UD5 <---------- (Has IOMMU enabled in BIOS)
2 x Realtek 8111D chip (10/100/1000 Mbit) <---- (onboard)
2 x SATA II 3.0 Gbps
6 x SATA 3 6.0 Gbps
PCI-e Realtek 8111D chip (10/100/1000 Mbit)
2 x 500GB HDD SATA software RAID1 for boot and VMs
6 x 2TB HDD SATA software RAID10 for Data for the VMs
Running 24/7 no problem so far. Also all are running in HVM mode. About being slow is only you have enormous amount of I/O will virtualized servers bog down. Otherwise its quite fast and easy to administer. I mainly use zentyal for file and print sharing.
AMD Phenom II X6 1075T
Gigabyte GA-890FXA-UD5 <---------- (Has IOMMU enabled in BIOS)
2 x Realtek 8111D chip (10/100/1000 Mbit) <---- (onboard)
2 x SATA II 3.0 Gbps
6 x SATA 3 6.0 Gbps
PCI-e Realtek 8111D chip (10/100/1000 Mbit)
2 x 500GB HDD SATA software RAID1 for boot and VMs
6 x 2TB HDD SATA software RAID10 for Data for the VMs
Running 24/7 no problem so far. Also all are running in HVM mode. About being slow is only you have enormous amount of I/O will virtualized servers bog down. Otherwise its quite fast and easy to administer. I mainly use zentyal for file and print sharing.
9
Installation and Upgrades / IM Jabber
« on: October 28, 2011, 04:24:00 pm »
Hi all,
Like to know if its possible to prevent users on IM to delete the chat history?
Tks in advance
Eric
Like to know if its possible to prevent users on IM to delete the chat history?
Tks in advance
Eric
10
Installation and Upgrades / Re: Caught SIGILL on Xen-64bit
« on: April 06, 2011, 06:06:24 pm »
I have upgrade all my XEN servers running 4.0.1 Debian Squeeze and have no problems running Zentyal in HVM mode. Also I had it running on Debian Lenny with XEN 3.3.2. If you are using EXT4 in Zentyal you need at least XEN 4.0. All my Dom0 and DomUs are running 64bit. I use pfsense 2.0 rc1 as my firewall and router which is also a DomU. I have two of these machines running production in two companies with no problems or downtime. I do suggest that you dedicate cores and about 2GB ram to Dom0 as it help with IO quite a bit. If you are trying to run PV mode with EXT4 you must use XEN 4.0+.
11
Installation and Upgrades / Re: How do I get a remote desktop?
« on: March 06, 2011, 03:31:14 am »
Goto www.x2go.org and also check out their mailing list at http://news.gmane.org/gmane.linux.terminal-server.x2go.devel. This is a very good solution and works for printing and sounds too.
12
Installation and Upgrades / DNS problem
« on: December 15, 2010, 03:28:47 pm »
Hi all,
I am getting a bit confused here about setting the DNS with MX records. The thing I need to do is that I have a zimbra server running and I can't resolve the MX record to it. I am using pfsense as my firewall and using zentyal as samba and now DNS. Here is the DNS from dig :-
; <<>> DiG 9.7.2-P3 <<>> example.com MX
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 48267
;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 2, ADDITIONAL: 2
;; QUESTION SECTION:
;example.com. IN MX
;; ANSWER SECTION:
example.com. 176824 IN MX 10 mail.example.com.
;; AUTHORITY SECTION:
example.com. 176824 IN NS ns2.example.com.
example.com. 176824 IN NS ns1.example.com.
;; ADDITIONAL SECTION:
ns1.example.com. 241736 IN A xx.xx.xx.xx <--- public IPs
ns2.example.com. 242358 IN A xx.xx.xx.xx <--- public IPs
;; Query time: 7 msec
;; SERVER: 192.168.2.254#53(192.168.2.254)
;; WHEN: Wed Dec 15 22:23:04 2010
;; MSG SIZE rcvd: 120
I have entered all this from the GUI in zentyal and not editing the files directly. Also is there a way to point directly to an internal address?
I am getting a bit confused here about setting the DNS with MX records. The thing I need to do is that I have a zimbra server running and I can't resolve the MX record to it. I am using pfsense as my firewall and using zentyal as samba and now DNS. Here is the DNS from dig :-
; <<>> DiG 9.7.2-P3 <<>> example.com MX
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 48267
;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 2, ADDITIONAL: 2
;; QUESTION SECTION:
;example.com. IN MX
;; ANSWER SECTION:
example.com. 176824 IN MX 10 mail.example.com.
;; AUTHORITY SECTION:
example.com. 176824 IN NS ns2.example.com.
example.com. 176824 IN NS ns1.example.com.
;; ADDITIONAL SECTION:
ns1.example.com. 241736 IN A xx.xx.xx.xx <--- public IPs
ns2.example.com. 242358 IN A xx.xx.xx.xx <--- public IPs
;; Query time: 7 msec
;; SERVER: 192.168.2.254#53(192.168.2.254)
;; WHEN: Wed Dec 15 22:23:04 2010
;; MSG SIZE rcvd: 120
I have entered all this from the GUI in zentyal and not editing the files directly. Also is there a way to point directly to an internal address?
13
Installation and Upgrades / Re: Vsftp passive mode
« on: December 07, 2010, 04:01:10 pm »
Hi all,
Just wondering anyone can make vsftp interact with ldap so that whatever the user can have access to samba will have same access from ftp?
Tks in advance
Eric
Just wondering anyone can make vsftp interact with ldap so that whatever the user can have access to samba will have same access from ftp?
Tks in advance
Eric
14
Installation and Upgrades / Re: Vsftp passive mode
« on: December 07, 2010, 03:59:59 pm »
Hi all,
Got it to work now. Just had to add a few lines to do it.
pasv_enable=YES
pasv_max_port=51000
pasv_min_port=50000
port_enable=YES
Hope this helps others
Eric
Got it to work now. Just had to add a few lines to do it.
pasv_enable=YES
pasv_max_port=51000
pasv_min_port=50000
port_enable=YES
Hope this helps others
Eric
15
Installation and Upgrades / Vsftp passive mode
« on: December 07, 2010, 03:07:01 pm »
Hi all,
Anyone know how to enable passive mode in vsftp without breaking it with zentyal? Or a better way of doing it?
Tks in advance
Eric
Anyone know how to enable passive mode in vsftp without breaking it with zentyal? Or a better way of doing it?
Tks in advance
Eric