Author Topic: Samba issue with scan printer  (Read 1424 times)

killmasta93

  • Zen Monk
  • **
  • Posts: 95
  • Karma: +14/-0
    • View Profile
Samba issue with scan printer
« on: November 21, 2020, 06:12:20 am »
Hi
I was wondering if someone else has had this issue before.  Currently running Aficio MP 4002 and on windows i can scan to a samba share it works unfortunately  smbv1, i tried enabling on the samba share doing the following on the nano /etc/samba/smb.conf

and adding this under global then restart

service samba-ad-dc restart


client min protocol = NT1
server min protocol = NT1


But not sure what else i missed?

Thank you

doncamilo

  • Zen Samurai
  • ****
  • Posts: 478
  • Karma: +165/-1
    • View Profile
Re: Samba issue with scan printer
« Reply #1 on: November 25, 2020, 10:18:34 am »
 :)

Did you check the firmware of the printer? It should exist an update to support non deprecated protocols. NT1 will weak the security of your domain.

Regarding your question, paste here the logs.

Cheers!
- Do my pigeons bother you passing over your land?
- They block the sun!

G. Guareschi., Don Camillo.,

killmasta93

  • Zen Monk
  • **
  • Posts: 95
  • Karma: +14/-0
    • View Profile
Re: Samba issue with scan printer
« Reply #2 on: November 25, 2020, 06:43:41 pm »
Thanks for the reply, well unfortunately it seems that printer does not have any firmware update

https://www.ricoh.com/products/mfp20170727_1

i guess im going to have to enable smbv1 but still haven't seem to be able to configure it

Thank you

badapple7

  • Zen Apprentice
  • *
  • Posts: 26
  • Karma: +10/-0
    • View Profile
Re: Samba issue with scan printer
« Reply #3 on: November 28, 2020, 12:18:44 am »
I think the configuration should be ;


Code: [Select]
client max protocol = NT1
server max protocol = NT1

only if printer run on smbv1, but this is crazy!!!! dont work on smbv1

killmasta93

  • Zen Monk
  • **
  • Posts: 95
  • Karma: +14/-0
    • View Profile
Re: Samba issue with scan printer
« Reply #4 on: November 28, 2020, 01:37:02 am »
yeah your right, what i did put another samba server

badapple7

  • Zen Apprentice
  • *
  • Posts: 26
  • Karma: +10/-0
    • View Profile
Re: Samba issue with scan printer
« Reply #5 on: November 28, 2020, 03:35:05 am »
hi...only one server for printers service, for only one printer? fu***** printer XD

if your problem is resolved, good!!!

killmasta93

  • Zen Monk
  • **
  • Posts: 95
  • Karma: +14/-0
    • View Profile
Re: Samba issue with scan printer
« Reply #6 on: November 29, 2020, 01:02:18 am »
yeah i know it sucks but yeah it got resolved