Hello everyone,
I need your lights for a small problem setting up a L2TP/IPSec PSK VPN server.
Here is my setup:
My network architecture: (Public IP01) --- ISP01 (192.168.3.254) --- (192.168.3.253)
WAN --- Zentyal Server (192.168.1.254) --- (192.168.1.0/24) LAN
(Public IP02) --- ISP02 (192.168.4.254) --- (192.168.4.253)
On the ISP01 router : 2 NAT rules configured like this
- Public IP01 500 192.168.3.253 500
- Public IP01 4500 192.168.3.253 4500
L2TP/IPSec PSK VPN server configuration :IPSec module installed, enabled and configured :
- Public IP Address : 192.168.3.253
- Remote Address : Any address
- Secret PSK : test
- Tunnel IP : 192.168.1.253
- Primary Server Name : local Zentyal DNS
- Range : 192.168.1.240 - 192.168.1.250
- User : test
- Password : test
VPN users will connect through the ISP01.I see incoming/outgoing requests on Firewall with Wireshark for ISAKMP protocol.
When i try to telnet my Public IP01 with the 500 and/or 4500 ports there are no responses.
I don't understand why everything doesn't work perfectly : /. Maybe it's a mistake in my Windows VPN configuration client ?
Need some help from you to solve this simple boring problem