Running two 3.02 64 bit servers.
I can get the second server to connect as slave. Master server sees the slave. But no users or groups appear on the slave side.
I found this thread which seemed to solve the problem with certificates (or lack of)
http://forum.zentyal.org/index.php/topic,14755.0.htmlI did set up the CA on the master server, but never set up one for the webadmin. Users and groups still wouldn't sync. I set up the CA on the slave, still no users or groups. After misreading the thread, I did setup a certificate on the webadmin, still no users or groups. I revoked the wedadmin certificate and disabled that service in the CA. Still no users or groups.
Where should I be looking for help? Are there some logs that will tell me what is the problem and if the problem is certificates?
Also, from that same thread I read this link
http://trac.zentyal.org/wiki/Documentation/Community/Document/SambaAndMasterSlaveAm I then to understand I need to remove the File Sharing module from the Master server? What qualifies as a Domain Service? What do I need to remove?
I reeeeeaaally need to get this working ASAP.
EDIT: Possibly, the CA Certificate bug is no longer an issue. After looking at /var/log/zentyal/zentyal.log, the problem was with my slave's firewall and the gateway on the slave's side. I needed to open the slave's firewall on port 443 for external connections, and the public IP of the Zentyal box was not correctly being forward to the internal IP. So: all my fault haha