Master and Slave Ldap

[jodel]

Hi,
I am trying to set up 1.4 in master and slave mode.  I have the master on an old pc on the network.  It seem to be set up ok. Ldap is browsable and the one user set up is there. This was set up using the 1.4 iso.

As a slave I downloaded an image for virtualbox and I have this running.  However when I try to set it up in slave mode I cannot set up the ldap DN as the box is grayed and uneditable.  It contains various dc= settings but these are not the same as the master.  I presume they should be?
When I try to activate users and groups module I get an error that
"Failed to enable: Can't connect to master eBox at 192.168.1.50 with the provided LDAP password"
I have the correct ip for the master and I have cut and pasted the password.
Any advise on how I could solve this problem would be appreciated.

Jodel

[jodel]

Solved!

When I typed in the password as opposed to cut and paste it worked perfectly.
Even though the cut and paste into a text editor looked fine for some reason the cut and paste between browser windows must be bringing more than the password characters with it.

Jodel