Author Topic: Zentyal is routing between subnet and/or VLAN by default?  (Read 1819 times)

Escorpiom

  • Zen Hero
  • *****
  • Posts: 897
  • Karma: +25/-1
    • View Profile
Zentyal is routing between subnet and/or VLAN by default?
« on: May 22, 2014, 08:34:23 am »
Got myself a vlan enabled switch, so let the fun get started :-)
Before borking yet another Zentyal install, I would like to ask the devs if routing between subnets and/or vlans is something that can be disabled?
I've read some topics on the forum (vhaulsk for example) and it is possible to isolate vlans by means of firewall rules.
But it would be much easier if routing between subnets/vlans can be disabled from the admin interface.

Don't know if my question makes sense, if it does please consider this a feature request.

Cheers.
Marcus' Rule:
Blanks & capitals = avoid it and you'll avoid problems...

robb

  • Guest
Re: Zentyal is routing between subnet and/or VLAN by default?
« Reply #1 on: May 22, 2014, 06:30:07 pm »
+1
It might even make captive portal unnecessary if you use 1 VLAN/Subnet for 'guest access' and attach an accesspoint to it.

Escorpiom

  • Zen Hero
  • *****
  • Posts: 897
  • Karma: +25/-1
    • View Profile
Re: Zentyal is routing between subnet and/or VLAN by default?
« Reply #2 on: June 12, 2014, 08:50:45 pm »
Sadly, nobody from the Zentyal team commented on this.
Vlan's are often used to segregate traffic. I think it is very important to be able to set a "non-routing" policy in Zentyal when it comes to vlans.
It has been asked before on the forum.

Cheers.
Marcus' Rule:
Blanks & capitals = avoid it and you'll avoid problems...