Author Topic: Erro ao adicionar Interface Virtual  (Read 1731 times)

tsutsumi

  • Zen Apprentice
  • *
  • Posts: 3
  • Karma: +0/-0
    • View Profile
Erro ao adicionar Interface Virtual
« on: August 15, 2012, 03:02:32 am »
Boa noite comunidade Zentyal,

Não estou conseguindo adicionar um ip alias através do modulo gráfico em
Rede -> Interfaces
Interfaces virtuais
Como exemplo seria:
Nome = 1
Endereço = 172.16.20.1
Mascara da rede = 255.255.255.0
Ao clicar em "+" retorna "Interface não existe"

Estou usando o core 2.3.19 do zentyal
e módulo network 2.3.12

No aguardo de uma ajuda, abraços

Edson

jquintao

  • Moderator
  • Zen Hero
  • *****
  • Posts: 648
  • Karma: +14/-0
  • jquintao
    • View Profile
    • NetSol
Re: Erro ao adicionar Interface Virtual
« Reply #1 on: August 18, 2012, 11:19:48 am »
Olá Edson,

Estranho... Sugiro abrir um ticket em http://trac.zentyal.org/... Parece ser um bug desta versão que por hora está no status alpha...

Abraços,
Jorge Quintão

tsutsumi

  • Zen Apprentice
  • *
  • Posts: 3
  • Karma: +0/-0
    • View Profile
Re: Erro ao adicionar Interface Virtual
« Reply #2 on: August 20, 2012, 12:52:30 am »
Jorge Quintão,

Como sugerido abri um ticket, http://trac.zentyal.org/ticket/4895

Aguardarei alguma resposta

Obrigado pelo retorno,

Edson

jquintao

  • Moderator
  • Zen Hero
  • *****
  • Posts: 648
  • Karma: +14/-0
  • jquintao
    • View Profile
    • NetSol
Re: Erro ao adicionar Interface Virtual
« Reply #3 on: August 22, 2012, 05:07:53 am »
Olá Edson,

O Javier da Zentyal já colocou uma mensagem no trac te pedindo:

Quote
Changed 36 hours ago by jamor@…

Hello Edson,

this feature is not giving me problems. Can you give me information about the following items:

-configuration of your interfaces

    output of the command '/sbin/ifconfig -a'
    file /var/log/zentyal/zentyal.log after you trigger again this error

Regards,

Javier

Envie estas informações a ele... Para que ele consiga tentar descobrir o problema...

Abraços,
Jorge Quintão

tsutsumi

  • Zen Apprentice
  • *
  • Posts: 3
  • Karma: +0/-0
    • View Profile
Re: Erro ao adicionar Interface Virtual
« Reply #4 on: August 27, 2012, 03:59:44 pm »
saída do comando ifconfig -a
--inicio--
eth0      Link encap:Ethernet  HWaddr 30:85:a9:35:f9:19
          inet addr:192.168.1.4  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::3285:a9ff:fe35:f919/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:504016 errors:0 dropped:0 overruns:0 frame:0
          TX packets:706853 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:60324540 (60.3 MB)  TX bytes:781342749 (781.3 MB)
          Interrupt:46 Base address:0xc000

eth1      Link encap:Ethernet  HWaddr 00:1e:58:49:b9:e6
          inet addr:189.xx.xxx.xx  Bcast:189.18.199.255  Mask:255.255.255.0
          inet6 addr: fe80::21e:58ff:fe49:b9e6/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:602594 errors:0 dropped:0 overruns:0 frame:0
          TX packets:533855 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:728369676 (728.3 MB)  TX bytes:62288721 (62.2 MB)
          Interrupt:16 Base address:0xe000

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:699892 errors:0 dropped:0 overruns:0 frame:0
          TX packets:699892 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:657204638 (657.2 MB)  TX bytes:657204638 (657.2 MB)

tun1      Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
          inet addr:192.168.160.1  P-t-P:192.168.160.2  Mask:255.255.255.255
          UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
--final--

Linha do erro no zentyal.log
2012/08/27 10:49:59 DEBUG> DHCP.pm:730 EBox::DHCP::fixedAddresses - Interface  não existe.

jquintao

  • Moderator
  • Zen Hero
  • *****
  • Posts: 648
  • Karma: +14/-0
  • jquintao
    • View Profile
    • NetSol
Re: Erro ao adicionar Interface Virtual
« Reply #5 on: August 31, 2012, 08:17:59 pm »
Olá Edson,

Você precisa colocar esta informação (e se possível alguns prints das telas da interface web) no trac.zentyal.org...

Abraços,
Jorge Quintão